1. 

   Michael
   May 17th, 2010 - 16:11

   sorry the dude. i only have the untethered jailbreak for windows. if u could get to a computer that has windows then give this a try.

   This is a step by step guide on how to jailbreak ur 2nd gen ipod touch with firmware 2.2.1 on windows *make sure u have winrar installed in ur pc*.

   -if u have windows vista this is how u install libusb

   Right click on libusb installer, then select properties
   Under compatibility tab, check execute this program in Windows XP service pack 2 and check execute as administrator

   -go to the link below and download the following (libusb, c++ red, unofficialsn0w, firmware 2.2.1)
   -install libusb
   -install c++ red
   -extract unofficialsn0w (exract it to ur desktop so it is easy to find)

   http://www.ipodtouchfans.com/forums/showthread.php?t=155816

   -rename the 2.2.1 firmware that you’ve downloaded OriginalFW
   -open the extracted unofficialsn0w folder and in it u will another folder called IPSW
   -drag and drop OriginalFW in that folder.
   -go back into the unofficialsn0w folder
   -look for a FILE called IPSW
   -there are two of them
   -one of them should begin to jailbreak the OriginalFW
   -it should take a while (just click on both of them until u hit the right one)
   -once it is finished with the jailbreak
   -open the IPSW FOLDER
   -in it should be two firmwares. one called OriginalFW another called JB
   -right click JB and open with winrar
   -navigate your way to Firmwareall_flashall_flash.n72ap.production
   -once in there minimize it
   -in the same IPSW FOLDER there is a file called
   -LLB.n72ap.RELEASE.img3
   -drag and drop “LLB.n72ap.RELEASE.img3″ into the minimized JB folder Firmwareall_flashall_flash.n72ap.production
   -now u can close everything
   -plug in ur ipod
   -place ur ipod into recovery (dfu) mode

   how to place ipod into recovery mode

   -while plugged in
   -hold down the home button and count to 5
   -(while holding down the home button) hold down the home button and count to 10
   -now let go of the power button and keep ur finger on the home button until it goes into dfu mode
   -note that this part is tricky and where a lot of ppl tend to go wrong
   -if it does not go into dfu mode just try the procedure over again until it does.

   -once ur ipod is in recovery (dfu) mode
   -open itunes
   -a window will pop up saaying ur ipood is recovery mode
   -click ok
   -open the unofficialsn0w FOLDER once more
   -double click on a FILE called RUNME
   -ur ipod screen should turn white
   -this is very important ^^^
   -now hold down the shift key on ur keyboard and left click restore
   -(shift+left click restore)
   -navigate ur way to the firmware called JB
   -and click it then click ok
   -ur ipod should begin to install the jailbroken firmware with no problem.

   really hope this helps!
2. 

   TechnoMacMaster
   May 17th, 2010 - 17:11

   I have detailed and picture guided instructions for mac on my site with latest jailbreak! Just click on “2G Jaibreak”

Leave a comment

Name (required)

Mail (will not be published) (required)

Website

( Cancel )

CAPTCHA Code *